I was able to confirm through my contact at Retrax that the T-channels on your 2019 Ford Raptor OEM tonneau Cover, model number VJL3Z84501A42A, share the same dimensions as the T-channels on the RetraxPRO XR Hard Tonneau Cover w/ Trax Rails # RTT-80373, confirmed to fit the same truck. This is true because Retrax helps to manufacture some of the components for the Ford tonneau covers.
With that in mind, the correct Rhino-Rack Vortex Crossbar System for your F-150 is # RRVA180B-RRRLT600,... view full answer...
The part number you asked about claims it is not confirmed to fit your 2023 Ford F-150 Raptor because it is not a fit for a '23 F-150 Raptor, it fits Silverado/Sierra 2500/3500 trucks with an 8 foot bed. The correct fit for your Raptor is the following:
- BAK Revolver X4s Hard Tonneau Cover # BAK56ZR view full answer...
We do not make/manufacturer any of the RoadActive Suspension products but they do have a RoadActive Suspension Custom Leaf Spring Enhancement Kit for your 2014 Ford F-150 Raptor and for that you would want to use part # RAS2691.
This is an excellent option for you that is very simple to install. It will help to improve stability, handling, and control by eliminating axle wrap and wheel hop. The tension is also adjustable so you can get the right amount of support/comfort. The best thing... view full answer...
The crossbars of the # RR29XR are 3-1/8 inch wide so basically any u-bolt wider than that would fit and work great. If you can let me know the basket you have I can see if we have replacement hardware for it. view full answer...
The Hollywood Racks Sport Rider SE Bike Rack part # HLY84FR is a great bike rack for the application you mentioned. It has a total length of 27-1/2" inches from the center of its hitch pin hole to the furthest point out on the rack so you'd need to measure to be sure if this would fit or not.
We can't recommend assembling the rack backwards. view full answer...
The EZ Connector Custom item # 319-R7-06 connects to the same harness that a standard 7-way connector attaches to. If you are just needing to replace a standard 7-way that is on or near your bumper you will want the EZ Connector Custom Vehicle Wiring Harness item # 319-S7-06. You won't need the extra wiring provided by the item # 319-R7-06 unless the new location is farther away or you plan on keeping the standard 7-way.
So long as your 2022 Ford F-150 Raptor came with a 7-Way from the... view full answer...
For a trailer hitch receiver confirmed to fit your 2018 Ford F-150 Raptor, I recommend using the Curt Trailer Hitch Receiver part # C26HR. The # C26HR is intended for trucks with the factory hitch. This trailer hitch receiver has a max gross trailer weight capacity of 10,000 lbs but you will need to subtract the gross vehicle weight (GVW) from your gross combined weight rating (GCWR) in order to determine the towing capacity of your Raptor. The (GVW) and (GCWR) can be found on an information... view full answer...
Yes, the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System item # SM99209 will work with your 2019 Ford Raptor. The Air Force One Tank Assembly is already installed on the Spartan Chassis as you mentioned.
You will also need the Demco SBS Air Force One Coiled Air Jumper Kit for 2019 to Present Spartan Chassis item # SM6296. The Spartan Chassis uses a different size connection point. view full answer...
The correct floor mats for a Phoenix Cruiser on Ford E-Series Cutaway Chassis is the WeatherTech All-Weather Front Floor Mats part # WTW51 for black, part # WTW51TN for tan, or part # WTW51GR for gray. view full answer...
The Roadmaster Direct-Connect Base Plate Kit part # RM-524431-5 is a great option for a 2015 Ford F-150 and a confirmed fit. It will mount using the factory tow hook holes so there's only minimal drilling required.
In regards to compatibility with a grille guard or bull bar, this would vary by guard/bar but judging where most mount it would not be compatible with most setups. I can't recommend changing or modifying any of the hardware. view full answer...
I've got a tonneau cover solution for your 2023 Ford F-150 Raptor but as of right now (May 2023) the Pace Edwards UltraGroove cover hasn't been confirmed to it your vehicle.
To get a hard tonneau cover and rail/rack system I recommend using the following:
- BAK Revolver X4s Hard Tonneau Cover - Roll Up # BAK56ZR
- Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964
The BAK Revolver is my favorite cover because it combines the sleek look of a soft cover with the strength and security... view full answer...
The Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems part # EQ95-01-5950 is designed to be used on straight-tongue trailers and would not work with your a-frame trailer. Since you said that the tongue of your a-frame is covered by the nose of the trailer you will want to consider a system that uses chains and attaches directly to the sides of the frame rails rather than clamping around them.
For this, I recommend the Strait-Line Weight Distribution w Sway Control part #... view full answer...
The Curt # C57WR Universal Truck Bed Extender should fit most trucks with a 60" tailgate width, and will provide you 26-1/2 inches of additional bed length. view full answer...
The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-508 unfortunately isn't a compatible match with a RetraxPRO XR tonneau cover. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 you were looking at would be a confirmed fit though. This rack will come with a adapters that can mount into the t-slots of the cover for easy installation and adjustment to haul various items, like your kayaks.
The HD crossbars come with tie-down points on each... view full answer...
The RoadActive Suspension Kit part # RAS2691 which is a confirmed fit for your 2017 Ford F-150 Raptor will work in the same way as the Roadmaster Active Suspension Kit part # RAS3611-Y which is confirmed to fit a regular 2017 Ford F-150.
The kit is designed to dissipate the forced placed on the springs when a load is present which results in improved stability, balance, traction and control. They will also maximize safe load carry capacity in addition to reducing suspension components... view full answer...
Yes, the Leer Hard Tonneau Cover # LE94FR will fit your 2022 Ford F-150 Raptor 5-1/2' bed.
This is a great option for Raptors because with your tailgate locked you're able to completely secure the cargo in your bed, plus this comes with weather seals to help keep your cargo dry.
Attached is a review video for you to check out. view full answer...
For a 2019 Ford F-150 Raptor I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-524431-5 along with the etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plate # e84ZR.
The arms of the # RM-524431-5 are removable so that you can have a nice clean look when not towing. The # e84ZR has compatible attachment points for this baseplate, has a 10,500lb capacity, and also includes safety cables so that you don't have to purchase them separately.
If you haven't... view full answer...
The Firestone Ride-Rite Air Helper Springs part # F2565 for a 2014 Ford F-150 Raptor have a compressed height of 6.5" and an extended height of 13.5". Therefore, the travel of the air springs is 7". If you're looking for an option with more travel, you'd want to consider jounce style replacements for which I recommend the SumoSprings Solo Custom Helper Springs part # SS52GR.
Please note, these suspension enhancements are designed for factory suspension so any aftermarket components could... view full answer...
The tailgate lock which will fit your 2012 Ford F-150 Raptor with factory power locks is the Pop & Lock Custom Tailgate Lock # PAL8250.
I've added links to a review video of this lock as well as a video of an install for you to take a look at. view full answer...
Go To Results